|
| |
|
|
 |
| The pole top tenon is
fabricated from 2" SCH 40 pipe or 3.5" SCH 40 pipe with a
minimum yield strength of 42,000 psi. It comes in standard lengths of
4" or 6". For side-mounted fixtures, pole tops may be drilled
to customers specifications. |
|
|
 |
|
The pole shaft is fabricated from hot rolled
commercial quality carbon steel with a minimum yield strength of 55,000
psi or 65,000 psi. The shaft has a round cross section with a uniform
taper of 0.14 inches per foot of length. |
|
|
 |
| The poles are
furnished with a 4" x 6" handhole located 15" above the
base. The handhole has a 1/2"-13 UNC nut for grounding purposes and
is supplied with a handhole cover and required hardware. |
|
|
 |
| The base plate
is fabricated from structural quality weldable hot rolled carbon steel
with a minimum yield strength of 36,000 psi. |
|
|
 |
| Anchor Bolts are
fabricated from a hot rolled carbon steel bars with a minimum yield
strength of 55,000 psi. The threaded end is galvanized a minimum of
12" and each bolt is furnished with two flat washers and two hex
nuts. |
|
