|
| |
|
|
 |
| The tenon is fabricated from 2" SCH 40 pipe or 3.5" SCH 40
pipe with a minimum yield strength of 30,000 psi. It comes in
standard lengths of 4" or 6". |
|
|
 |
| The pole shaft is fabricated from hot rolled
commercial quality carbon steel with a minimum yield strength of
55,000 psi. The shaft has a round non-tapered cross section. |
|
|
 |
| The poles are furnished with a 2.5"x5" handhole (for poles with
a 3" or 4" base O.D.) or a 4"x6" handhole (for poles
with a 5" or 6" base O.D.) located 15" above the
base. The handhole has a 1/2"-13 UNC nut for grounding
purposes and is supplied with a handhole cover and required hardware. |
|
|
 |
| The base plate is fabricated from structural quality weldable hot rolled
carbon steel with a minimum yield strength of 36,000 psi. |
|
|
 |
| Anchor Bolts are fabricated from a hot rolled carbon steel bars with a
minimum yield strength of 55,000 psi. The threaded end is
galvanized a minimum of 12" and each bolt is furnished with two
flat washers and two hex nuts. |
|
