|
| |
|
|
 |
| The pole top tenon is fabricated from 2" SCH 40 pipe or 3.5"
SCH 40 pipe with a minimum yield strength of 42,000 psi. It comes
in standard lengths of 4" or 6". For side-mounted
fixtures, pole tops may be drilled to customer's specifications. |
|
|
 |
| The pole shaft is fabricated from a weldable grade of hot-rolled
commercial quality carbon steel with a minimum yield strength of
55,000 psi. The shaft has a square cross-section with a
uniform taper of .1138 inches per foot of length. |
|
|
 |
| The poles are furnished with a 4"x 6" handhole located
15" above the base. The handhole has a 1/2"-13 UNC
nut for grounding purposes and is supplied with a handhole cover and
required hardware. |
|
|
 |
| The base plate is fabricated from structural quality weldable hot-rolled
carbon steel with a minimum yield strength of 36,000 psi. |
|
|
 |
| Anchor Bolts are fabricated from a hot
rolled carbon steel bars with a minimum yield strength of 55,000 psi.
The threaded end is galvanized a minimum of 12" and each bolt is
furnished with two flat washers and two hex nuts. |
|
