|
| |
|
|
 |
| The truss arm
is made from 2" SCH 40 pipe with a minimum yield strength of 42,000
psi.
|
|
|
 |
| The two-bolt
simplex is cast from carbon steel with a minimum yield strength of 36,000
psi. The simplex is supplied with two 1/2"-13 UNC structural hex
bolts.
|
|
|
 |
| The pole shaft is fabricated from hot rolled
commercial quality carbon steel with a minimum yield strength of 55,000
psi.
The shaft has a round cross section with a uniform taper of 0.14 inches
per foot of length. |
|
|
 |
| The poles are
furnished with a 4" x 6" handhole located 15" above the
base. The handhole has a 1/2"-13 UNC nut for grounding purposes and
is supplied with a handhole cover and required hardware. |
|
|
 |
| The base plate is
fabricated from structural quality weldable hot rolled carbon steel with a
minimum yield strength of 36,000 psi. |
|
|
 |
|
The anchor bolts are fabricated from hot-rolled carbon steel bars with a
minimum yield strength of 55,000 psi. The threaded end is galvanized a
minimum of 12" and each bolt is furnished with two flat washers and
two hex nuts. |
|
