|
Base plate and anchor bolts are provided upon request.
|
 |
 |
|
Welded or bolted vangs are provided upon request.
|
|
|
Standard coating, 16 mil minimum, is applied to the embedded length
plus 1' above the groundline unless otherwise specified.
|
 |
|
One and Two hole NEMA grounding pads are available upon request.
|
 |
|
A ground Sleeve extending one foot above and one foot below the
groundline is available upon request.
|
 |
|
Sets of one inch diameter heavy hex nuts are standard. They are
welded onto the pole to allow for pulling points in the tightening of
slip joint connections.
|
 |
 |
|
Drilled hole configurations from 3/4" to 11/8" diameter
are available per customer specifications.
|
|
|
Ladders, clips, or step bolts are upon request.
|
|
|
Climbing ladder clips for ladders are furnished on the face of the
pole from approximately eight feet above the groundline to the top of the
pole. In addition, working ladder clips will be provided 180° opposite
to the climbing ladder clips on the top section of the two-piece poles,
or a minimum of the top 25 feet for all poles. |
 |
|
Standard step clips for 3/4" diameter step bolts are welded to
the pole from approximately 8 feet above the groundline to the top of
the pole. In addition, working step clips are placed to provide safety
and easy access to hardware.
|
 |
